Simple Door Lock Mistakes That Could Have Been Avoided

8 Simple Door Lock Mistakes That Could Have Been Avoided

It may sound easy when you hear the words ‘installation of locks’. The process, however, can be very easy but there are some mistakes which are made that can make the whole work a sham. Here are some simple door lock mistakes that can be avoided.

1. Too Cheap 

There is one problem about buying cheap locks, they can be easily bumped or picked apart by even a first-time burglar. Don’t end up buying low-quality products because of the price. Most times, these cheap locks are made from poor quality materials and they do not last long. Try to get at least grade two locks, it is better than getting cheap and low-quality locks.

2. Too Fancy 

Don’t allow yourself to get deceived by some of the digital locks you see on Sci-Fi movies, make sure you check out the thought of other users before going through the installation process. The more complicated the lock, the more difficult the installation process may be. The last thing you want is a fancy lock that simply does not work. Finally, most contractors do not know how to install complicated locks properly, so make sure you do your research before hiring one.

3. Not Considering the Weather 

Before purchasing a lock, try to put the weather condition into consideration. Sometimes, extreme weather conditions can make the doors strong, which prevents them from locking. Very cheap locks that are not well engineered may have loose screws or moving plates in cases of extreme weathers. Some weatherproof locks like the All-Weather Mechanical Keyless Deadbolt Door lock are recommended because they can withstand extreme weather conditions whether it’s during winter or summer. These locks are typically waterproof and they do not use batteries.

4. Not secure

The front door requires the highest security in every home or establishment. Deadbolts have the highest security level amongst all door locks since they do not contain springs. Technological advancements have made it possible for deadbolts to obtain a higher level of security by the addition of features such as a built-in alarm system. The Schlage Connect Century Touchscreen Deadbolt with Built-In Alarm combines the strength and durability of deadbolts with technology and automation. This door lock has an ANSI Grade 1 security level, which is considered to be the most durable and secure in residential security.

5. Not Checking Your Door Material 

There are some door locks which require a specific kind of door or material. In some cases, when a lock is just meant for solid core doors and does not match with the existing glass door and steel door, the last thing you would want to happen is the replacement of an entire door just because of a new lock. For instance, the Samsung Digital Door Lock SHS-P718 Fingerprint Push Pull Two Way Latch Mortise can be installed on a solid door but not on fiberglass or metal doors.

6. Misaligning the lock 

Before many people realize that they have fixed the lock wrongly, it’s usually too late. Apart from improper lock installation, it can also damage your door. Firstly, you have to make sure that you are drilling the holes in the right place. Most of the doors need a deadbolt lock. Deadbolt locks require three holes to be drilled and you have to make sure that all three of them should be aligned perfectly with each other. Take your time to measure and mark where you need to drill the holes. Use a pencil to mark the point.

If the holes are not aligned properly, it might require you to replace the whole door. It is always better for you to let the experts handle the tasks that require expertise. As professional locksmiths in New Orleans, we do the job perfectly in minimum time.

7. Drilling the holes incorrectly 

When you are installing a door lock, it’s not all about drilling the holes, it’s about doing it skillfully and efficiently so that your door can go undamaged for a long time. Make sure that the drills enter straight into the door and you have to keep drilling until you are able to see the screw at the other end of the door. Once the screw has reached the end, drill the hole from the other end to make a clean hole. If the lock is not installed properly, you will have trouble even locking the door, let alone ensuring a protective lock. Unless you are technical sound at handling such work, you should hire a professional locksmith to help install the locks.

8. Not Reading the Instructions

Anytime you buy a new set of locks, it comes with a set of instructions that serves as a guide on the proper installation of the lock. You might see it as a simple task but there are little details you should take note of unless you don’t want the installation process to come out well. It can be very frustrating if you find out that the lock wasn’t properly installed because of an instruction you overlooked.

Locks are very important for our safety. It may seem easy to install them but one mistake can make everything go wrong. And trust me when they come out wrong, it usually costs a lot more to get it fixed. Just make sure you avoid these simple mistakes so you won’t have to go through the stress and call on a professional and reliable locksmith in New Orleans if you want to have it handled stress-free.

No Comments

Post A Comment

Skip to content